Looking for:
Hotfix 1 for autodesk vehicle tracking 2018 free |
Autodesk Vehicle Tracking With Crack Download [%] Free - NewCrackKey - Autodesk Vehicle Tracking 2018.0 Hotfix 1
Skip to main content. Knowledge Network Support and learning Vehicle Tracking. Support and learning. To translate this article, select a language. View Original Translate. English Original X. View Original X. Products and versions covered Vehicle Tracking By: Support.
Support 0 contributions. Issue: You are getting the following errors when installing Vehicle Tracking hotfix and update 1 via Autodesk Desktop App or by running the local installer.
Install via Autodesk Desktop App Local installation file. Select Uninstall. In the list, select "Vehicle Tracking" and click Next, follow steps until completed. Repeat the process for each entry that reads "Vehicle Tracking" you need to restart the utility after every uninstall attempt Download Vehicle Tracking install package with Browser Download method from your Autodesk Accounts portal.
If all above steps could not fix the issue and you are in a domain , maybe the user has not the permission to get information for the installed version. Solution: Open a command line as Administrator.
Autodesk Vehicle Tracking Object Enabler | AutoCAD | Autodesk Knowledge Network.Autodesk Vehicle Tracking Free Download – Video installation
Autodesk Vehicle Tracking Update 1 Readme.CAD Forum - Download CAD files and utilities
For reference, save or print this document. It is strongly recommended that you read this entire document before you install. Vehicle Tracking Update 1 changes the File Format of the drawings. If you do not have the upgrade, the newer format Vehicle Tracking commands will be disabled and the Vehicle Tracking entities will be proxy objects.
AutoCAD Map Hotfix 1 should be installed to avoid the issue of grip editing in Vehicle Tracking sometimes produce unpredictable results. Fixed an issue where the deflection min and max values in the Properties dialog are not the values defined in the Standards dialog. Drawing units settings are disabled when you have opted to get the values from the active Civil 3D drawing. The option to get units and driving side of road from the drawing has been added to the start up dialog box and the Settings Wizard.
Removed the need to use the Make Default button when changing options that only take effect at start up. Fixed an issue that caused offset road markings to be offset on the wrong side on the exit side of approach roads. Parking tools have improved messages when selecting an unsuitable entity like a circle to create a parallel row of bays from. Roundabout approach roads can now have their crossfall at the blend point taken into account when calculating curb line elevations.
Roundabout crossfall diagrams in Roundabout Properties and Standard Editor pages now show profile details of the line crossfall region being defined. Roundabout curb calculation can handle more abnormal geometric conditions when adjusting the change in offset from the edge of travel way with the road flaring. The roundabout curb flare length has been changed from a fixed length to a ratio based on the change in offset from the edge of travel way.
Geometry Improved the odd geometry of Roundabouts when dragging the blend and deviation point. The issue was caused by cut down calculation to increase speed and usability when dragging. Previous version drawings with roundabout corridors using not simple assemblies now open with the new Curb and Cut and Fill baseline enabled. Rumble and speed striping dimensions are now shown along the curved line and not as a line of site value. Moved the location of roundabout sign warnings in design check so they are under the relevant arm.
Roundabout slip lanes have been enhanced to show errors when the geometry forced the lane to enter the ICD area of the roundel. Roundabout slip lanes in AutoCAD Civil 3D now create and maintain alignment profiles for the inside edge of travel-way of slip lanes.
Roundabout slip lanes now have better warnings placed in the drawing when certain geometric layout issues prevent slip lanes from being calculated. Improved warnings when a slip lane was forced to enter the area used by the road lanes due to incorrect geometric layout. Fixed an issue in the Advanced Vehicle Editor that caused the dialog box to close without saving the data when the Enter key was pressed in some entry fields.
Fixed an issue where aircraft service vehicle outlines where not displayed when enabling the report. Fixed an issue where the driving side of the road sometimes changed when using Vehicle Tracking inside Civil 3D. Fixed an issue that caused an empty design check warning when a roundabout was created on a surface. Fixed an issue where the entry and exit fillet radius values on standards were swapped after editing the roundabout standard.
Fixed an issue where a warning message box regarding Fly-by Camera mode not being available when using driver eye view had an invalid window title. Fixed an issue where there were overlapping icons on the buttons at the bottom of the Auto Drive dialog box. Fixed an issue when editing the parking bay dimensions table where it was not refreshing with the defaulted or calculated value when the cell was set to zero or cleared.
For Parking, repeated messages informing you that the row cannot be constructed when creating parallel rows with curved bays were removed. Fixed an issue where some parking rows caused the following message to display repeatedly and apparently randomly appear in the command line: "Parking meters can only be created if the parking row has a path. Fixed an issue where the Add Roundabout Approach dialog box was copying the min and max exit side values from the entry side. Fixed an issue where the roundabout approach road sometimes was invalid when adding a new road alignment.
Fixed an issue where the blend point on an arm could sometimes be moved a long way from the roundabout when adding the arm. Fixed an issue to remove the dialog box asking to confirm deletion of owned sub-entities when canceling the creation of a new roundabout.
Fixed issues with uneven Roundabout corridors caused by two different alignments used to define joining baselines. Fixed an issue where the Design Check for roundabout slip lane text was truncated and missing the key values. Fixed an issue where the roundabout flare length ratio design checks where using the wrong conversion factor when displaying invalid values. Fixed an issue where running a design check on roundabouts with invalid arms sometimes resulted in two "Invalid Arm" errors reported.
Fixed an issue where the roundabout lane markings were incorrect when an additional lane was defined for the entry. Fixed an issue where the roundabout outside curb was incorrectly generated on approaches with invalid slip lanes. Removed the Proxy Graphics warning on some machines caused by roundabout sign blocks when creating roundabouts using the Brazilian, Norwegian, Polish, Spanish and Swedish standards.
Fixed an issue where roundabouts resolved cases where the roundel curb offset grip was not located on the curb. Removed the Default column heading on all slip lane related tabs on the Roundabout Properties dialog. Fixed an issue where the roundabout properties incorrectly accepted negative values on some of the fields in the levels and grade tabs.
Fixed an issue that prevented new styles from being created in the Roundabout Properties dialog boxes Style combo box. Fixed an issue in the Roundabout Properties dialog box when clicking on the text "No signage objects defined in specified standard" in the signage list when the roundabout was using a standard containing no signage data.
Fixed an issue where diagrams about fields in the Roundabout Standards Editor did not always update when changing fields. Fixed an issue where on the roundabout standard explorer data columns, the "Inscribed Edge Of Travel-way Diameter" was incorrectly labeled as "Inscribed Radius". Fixed an issue where signs were not always correctly located after moving a roundabout with the AutoCAD Move command. Fixed an issue for the Angular Adjustment for signs in the Roundabout Standard Editor where the values entered were not saving correctly.
Fixed an issue on Roundabout Slip lanes taper and flare length where the Min and Max value were not correctly saving. Fixed an issue where the roundabout slip lane crossfall values were using the wrong formatting conversion when displaying out of range values. Fixed an issue where the roundabout slip lanes outer flare length was ignoring the relevant slip lane island details when calculating the length from the change in width. Fixed an issue where roundabout turn arrow diagrams in the roundabout properties page and standard editor were displayed with inverted direction of vehicle travel.
Fixed an issue where lane turn arrows were being incorrectly displayed on roundabout arms with an additional lane. Fixed an issue where the location of some of the rumble strip and speed striping grips were in the wrong location when loading pre Vehicle Tracking drawings.
Fixed an issue in the Settings wizard where the reference document for dynamic effects for vehicles traveling above 15kmh could not be changed. Fixed an issue in some languages where the overall check box text enabling slip lanes was truncated. Fixed an issue where roundabouts, under some conditions, displayed a spike on the outside curb on slip lanes near the closest point to the roundel.
Fixed an issue that caused the splitter island center construction line not to display on some roundabouts when Stockdale crown lines mode was disabled. Fixed an issue where the Swept Path Manual Drive controller was ignoring system settings defining where the controller was located on the screen. Fixed an issue where the Swept Path Vehicles, after editing a unit in the advanced editor, the unit was deselected in the list of units.
Fixed an issue where the tooltips in Vehicle Tracking toolbars in MicroStation were always displayed in English. Fixed an issue when in Vehicle Explorer, printing a vehicle library group caused the group to disable some explorer functions on the group and the group disappeared after exiting the Explorer, only reappearing the next time Autodesk Vehicle Tracking was started. Fixed an issue where the profile report was not showing the side view of a vehicle in either the vehicle diagram and when inserted in the drawing.
Fixed an issue where vertical bars were being displayed in some dialog box text in Czech, Chinese, Japanese and other languages. Fixed an issue on warning symbol tooltips for out of range min or max values on roundabouts where truncated, causing the value and the standard value not to be displayed. Feature Fixes Advanced Vehicle Editor Fixed an issue in the Advanced Vehicle Editor that caused the dialog box to close without saving the data when the Enter key was pressed in some entry fields.
Comments
Post a Comment